 |
Ahha1
| |
 This
is an Ahha breakout board, this will simplify the
wiring, allowing you to easily connect the limit
switches, auxilary I/O, and driver signals. Click
on the thumbnail for a larger image. |
||
|
artisan
| |
This is the Artisan OP software
package and IF15/16 interface card. This card will
come with the latest software revision 4.0 as well
as a copy of the latest beta software with
constant contouring. |
||
|
DB37bo
| |
 If
you don't want the Ahha breakout board, this is a
standard DB-37 cable breakout board. |
||
|
mvc008f
| |
 Also
included is a monsterous 75 volt 1KVA custom wound
torroid transformer. This will have more than
enough power for a 4 axis system. |
||
|
mvc015f
| |
 Compumotor
OEM-650 75 volt 7.5 amp stepper drives for the XYZ
axis. |
||
|
mvc018f
| |
 PacSci
920 ozin high performance hybrid stepper motors
for XYZ axis |
||
|
oem_650
| |
 Compumotor
OEM-650 75 volt 7.5 amp stepper drives for the
rotary axis. |
||
|
P1010001
| |
Dyna 4400M mill |
||
|
P1010002
| |
 Dyna
4400M mill head |
||
|
P1010003
| |
 Dyna
4400M mill tool changer |
||
|
P1010004
| |
 Dyna
4400M mill spindle motor |
||
|
P1010005
| |
 Dyna
4400M mill electronics cabinet, rear side view. |
||
|
P1010006
| |
 Dyna
4400M mill electronics cabinet, rear view. |
||
|
P1010007
| |
 Dyna
4400M mill electronics cabinet, rear view |
||
|
P1010008
| |
 Dyna
4400M mill electronics cabinet, rear inside view |
||
|
P1010009
| |
This is the board that controls
the tool capture motor and the tool changer
carousel arm. |
||
|
P1010010
| |
 Here
you can see the Grayhill / Opto22 interface module
motherboard. |
||
|
P1010011
| |
 Close
up of some more of the original electronics
included in the rear cabinet. Could easily be
marketed and sold to someone who is running
another Dyna 4400 mill with the original control |
||
|
P1010012
| |
 Close
up of some more of the original electronics
included in the rear cabinet, Could easily be
marketed and sold to someone who is running
another Dyna 4400 mill with the original control. |
||
|
P1010013
| |
| Included but not pictured are 9 tool holders for this machine. There is a nice selection of holders, you should not need to buy more tool holders to get started machining. | ||
|
P1010014
| |
 Original
operators panel for the machine is included, could
easily be marketed and sold to someone who is
running another Dyna 4400 mill with the original
control |
||
|
P1010015
| |
 Original
operators panel for the machine is included, could
easily be marketed and sold to someone who is
running another Dyna 4400 mill with the original
control |
||
|
rotary
| |
 This
is the 8" Yuasa indexer with stepper motor.
This is a nice indexer with a 3 jaw chuck. I do
not have the jaws for this chuck.
|
||