qpd2008 cutout template
w dust collector-1
|
|
|
|
|
I need
to cut 7 or 8 mounting holes in the ceiling of my den that will fit the
QPD2008 speaker. Last time I cut a hole in the ceiling the dust destroyed
half of the house.
So I put
my thinking cap on and came up with this cutout template and dust collector
that will catch the majority of the dust.
There is
a process that will allow me to locate the cutout in the proper location
centered on the TV (center of the wall) using the center hole in the
template. Once that position is found the dust collector is squared to the
wall from the listening area and holes are drilled up through the drywall.
Once these holes are made, screws clamp the template and dust collector in
place sandwiched to the drywall.
After
double checking and triple checking fro proper
alignment and spacing a vibrating multi-tool
is used to cut the hole following the template.
Alternately, shop vac can be attached if you have a good filter or a
really long hose so you can have the vacuum outside. I made the nipple on
the collector the size of my pool hose, its 50 ft long!
|